Amber Science Inc. 277 Blair Blvd. Eugene, Oregon 97402-4147, (541) 345-6877 FAX (541) 345-6277
Back to Site Map Click Here

Model 605 Analog Conductivity Resistivity Meter

Model 605 Analog Conductivity Resistivity Meter


The Model 605 Analog Conductivity Resistivity Meter is designed to be rugged enough to withstand field use and yet precise enough for use in the laboratory.

The instrument offers six decades of range, 1.1 micromho to 110 millimho and .9 meg ohm to 9 ohm full scale. All ranges are covered with one conductivity cell having a constant of approximately 10. Each cell has its own internal thermistor for temperature compensation.

The Automatic Temperature Compensation switch allows a display with or without temperature compensation, cell constant determination and adjustment from 40% to 110% of nominal value for direct display of Total Dissolved Solids.
Cell drive is a low amplitude sine wave, rectification is synchronous.

The 605 is housed in an impact resistant ABS housing. The analog meter movement has a three inch span and is a high torque taut band type.

Power is supplied by one 9 volt battery. Battery voltage displayed. Battery life is greater than 200 hours.

SPECIFICATIONS
Ranges:          

CONDUCTIVITY
(linear)
Accuracy:    1%
RESISTIVITY
(nonlinear)
     
0 to 1.1 micromho   to 0.9 M ohms
0 to 11.1 micromho   to 90.0 K ohms
0 to 110.0 micromho   to 9.0 K ohms
0 to 1.1 millimho   to 900.0
0 to 11.1 millimho   to 90.0
0 to 110.0 millimho   to 9.0

Automatic Temperature Compensation

TEMPERATURE 		  SLOPE

5°C

 

1.88%

10°C

 

1.91%

15°C

 

1.94%

20°C

 

1.97%

25°C

 

2.00%

30°C

 

2.03%

35°C

 

2.06%

40°C

 

2.09%

45°C

 

2.12%


CELL CONSTANT   adjustability
Nominal 10
Maximum 11
Minimum 4

ENVIRONMENTAL LIMITS
Temperature 5°C to 45°C
Humidity 5% to 90%

POWER
One 9 volt battery.  Model 605-C and 605-CR include a rechargeable nickel metal hydride battery.

ORDER INFORMATION   Model 605 includes one pint bottle of 718 micro-mho calibration solution, manual and one year warranty.

Note:  Order Cell (5 pin) separately.

Model 605 Analog Conductivity Meter
Model 605C Analog Conductivity Meter with Ni-MH Battery & Charger
Model 605CR Analog Conductivity Meter with Ni-MH Battery, Charger & Recorder Output

Optional Accessories:
P/N 6525 Lab Stand with Cell Holder

For Prices:   See General Price List      Note: Design and Specifications may be changed without notice.