Amber Science Inc. 277 Blair Blvd. Eugene, Oregon 97402-4147, (541) 345-6877 FAX (541) 345-6277
Back to Site Map Click Here

Model 2052 Digital Conductivity Meter

  • Measure six ranges of Conductivity
  • Portable meter operates on single 9 Volt battery
  • Ideal for use in the field or laboratory
  • Digital display ½" high, 3 ½ digit with floating decimal
  • Easy to use and calibrate
The Model 2052 features three modes of operation, two for the measurement of solution conductivity over six decades from .001 micro Siemens (µS) to 200 milli Siemens (mS) and one for Self Check. The Self Check feature allows for verification of proper operation, the ability to adjust for cell constant variations and Total Dissolved Solids (TDS) scale factor. The conductivity and TDS measurement data is displayed on a 3 ½ digit Liquid Crystal Display (LCD) with floating decimal.

The Function switch selects Power Off, Automatic Temperature Compensation (ATC) On, Off, or Self Check. The ATC is set at 2% per degree Celsius (C) at 25°C. The Model 2052 is designed to use a cell with a constant of between 9 and 11. Self Check (Cell constant adjust) span is from 40% to 110% of nominal to allow cell constant correction and TDS scale factors to be easily set. The Cell drive is a low amplitude sine wave, rectification is synchronous.
Model 2052 Digital Conductivity Meter

The Model 2052 is a portable, dependable, rugged and precise instrument, ideal for use in the field or laboratory. A compact Lab Stand with Cell Holder and AC Adaptor is available for bench top use.

Specifications:
Measurement Range and Resolution [Note: Siemens (S) = mho ()]

Range

 

Full Scale

  Resolution

A

  2.000 µS   .001 µS

B

  20.00   .01

C

  200.0   .1

D

  2.00 mS   .001 mS

E

  20.00   .01

F

  200.0   .1

Instrument Accuracy

Accuracy at 25°C plus or minus a digit

RANGE

  FULL SCALE

A

  .20%

B

  .15%

C

  .10%

D

  .10%

E

  .15%

F

  .30%

Temperature Compensation  5 - 45°C  all ranges with reference temperature of 25°C

Slope

Temperature

  Slope   Curve Trace Accuracy

5°C

  1.88 %/°C   -0.4%

10°C

  1.91 %/°C   0

15°C

  1.94 %/°C   +0.2%

20°C

  1.97 %/°C   +0.2%

25°C

  2.00 %/°C   0

30°C

  2.03 %/°C   -0.2%

35°C

  2.06 %/°C   -0.2%

40°C

  2.09 %/°C   0

45°C

  2.12 %/°C   +0.4%

Environmental Limits
Temperature: 5 to 45°C
Humidity: 5 to 90% (relative, non condensing)

Power Requirements

Power Requirements
One nine (9) volt alkaline battery (NEDA 1604), battery life approximately 220 hours with a low battery (Lo Batt) indicator illuminating when there is approximately 20 hours of battery life remaining. An AC adaptor may be employed as a remote power source if desired (order optional Lab Kit # 6540).

Cell Connector
Five pin circular din connector

Conductivity Cells
Model 2052 uses the 500 Series Cells. Order 5 pin Cell separately.

Display
Half inch (1/2") high Liquid Crystal Display (LCD), 3 ½ digit, dual slope A/D converter, 2,000 digits full scale with a floating decimal. Displays "1" for over-range. Display is updated approximately two times per second.

Case Size
7.5" Length x 4" Width x 1.29" Height (case only; excludes knobs)

Weight
14.2 ounces (meter only)

Instrument Warranty
Twelve months (1 year) from date shipped.

Available Accessories
6540 Lab Kit, includes two piece stand with cell holder and 115 V AC adaptor
500-6 Cell Connector with one meter cable and 6K thermistor (Kit to aid in fabrication of custom cell)
8501 Platinizing Station (for re-platinizing (Pt) cells).  Does not include Solution.

*Conductivity Cells (Order separately)
500 series Cell, (5 pin din connector) with embedded thermistor.
Cell constant approximately 10 cm-1, cable length is 1 meter (39").
Gold (Au) plates, recommended for high purity solution below 2,000 µS
Platinum (Pt) plates may require occasional re-platinizing
Multi-purpose Cells are combination Dip, Flow or Pipette
Micro Flow Cell has 316 Stainless Steel (S/S) plates with approximate Cell constant 100 cm-1,
(all readings must be multiplied by 10 when using the P/N 529 Micro Flow Cell ).

Model 2052 includes: one pint 718 micro-mho calibration solution, spare 9 volt alkaline battery and instruction manual. Note:  Order Conductivity Cell and accessories separately.

*Order 5 Pin Conductivity Cell Separately:   Dip / Multi-purpose Cells    Or   Micro Flow Cell

For Prices:   See General Price List

Design and specifications may be changed without notice.